Tool To Cut M.C. Cable

A reliable and sharp cutting tool is necessary when working with MC (metal-clad) cable. There are a few different types of tools that can be used, but a simple utility knife works well for most DIY projects. Be sure to use a new blade or one that is in good condition. A dull blade will make it difficult to get a clean, straight cut.

To avoid damaging the metal sheathing, Ways To Cut Metal Clad Cable start by scoring the blade along the top of the cable. Make several shallow passes until you’ve cut through the paper insulation and metal sheathing. Then, apply pressure to the blade and rotate it around the circumference of the cable to cu through the wires inside.

If you need to make a longer cut, Using an end stripper or a sharp set of wire cutters, first strip away about an inch of the outer metal sheathing. This will give you a starting point for your utility knife blade. Cut along the length of the exposed wires, being careful not to damage them. Once you’ve made your cuts, finish by stripping away any remaining metal sheathing with your end stripper or wire cutters.

Comparison Chart For Tool To Cut Mc Cable

Tool To Cut Mc Cable Recommendations

Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter Cut Flexible Conduit and Armored Cables with Storage for Extra Blades

Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter, Cut Flexible Conduit and Armored Cables, with Storage for Extra Blades

Check Price On Amazon

Are you in need of a reliable and durable cable cutter? Look no further than the Klein Tools 53725 BX Cable Cutter. This cutter is designed to easily cut armored cable up to 3/8-Inch (95 mm) diameter, including BX, AC, MC, MCAP and Greenfield. The sharp cutting blade eliminates burrs, and the depth of cut can be adjusted between standard MC and reduced diameter MC to prevent cable nicks. The Klein Tools 53725 BX Cable Cutter also comes with one blade stored in the handle for convenience, and can hold up to six replacement blades in the handle. So if you’re in need of a tough and dependable cable cutter, choose the Klein Tools 53725 BX Cable Cutter.

Common Questions on Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter Cut Flexible Conduit and Armored Cables with Storage for Extra Blades

• What are the dimensions of the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter?
The dimensions of the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter are 9.5″ x 4.5″ x 1.5″.

• What is the weight of the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter?
The weight of the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter is 0.85 lbs.

• What is the length of the blade on the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter?
The length of the blade on the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter is 3″ long.

• What is the material of the Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter?
The Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter is made of High-carbon steel.

Why We Like This

• Cuts armored cable up to 3/8 Inch (95 mm) diameter
• Eliminates burrs
• Adjusts between standard MC and reduced diameter MC to prevent cable nicks
• Comes with one blade stored in handle
• Holds up to six replacement blades in handle

Additional Product Information

Color Black
Height 8 Inches
Length 24 Inches
Weight 1.36 Pounds

Klein Tools 63215 Cable Cutter High-Leverage 6.5-Inch Compact Forged From US Made Steel Ideal for Cutting Aluminum and Copper Cable

Klein Tools 63215 Cable Cutter, High-Leverage 6.5-Inch Compact, Forged From US Made Steel, Ideal for Cutting Aluminum and Copper Cable

Check Price On Amazon

Klein Tools 63215 Cable Cutter is a high-leverage cutter that is ideal for cutting aluminum and copper cable. It has a compact design that makes it perfect for working in confined spaces. The cutter is made from forged US-made tool steel for durability and has hot-riveted joints for smooth action and no handle wobble. The handles are also plastic-dipped for comfort.

Common Questions on Klein Tools 63215 Cable Cutter High-Leverage 6.5-Inch Compact Forged From US Made Steel Ideal for Cutting Aluminum and Copper Cable

• What is the Klein Tools 63215 Cable Cutter made from?
The cutter is made from US made steel.

• What is the ideal use for the Klein Tools 63215 Cable Cutter?
The cutter is ideal for cutting aluminum and copper cable.

• How big is the Klein Tools 63215 Cable Cutter?
The cutter is 6.5-inches long.

• How much leverage does the Klein Tools 63215 Cable Cutter have?
The cutter has high leverage for cutting through tough materials.

Why We Like This

• 1. Klein Tools 63215 Cable Cutter is made from US made steel for extra durability
• 2. It has a compact high leverage design that cuts up to 1/0 AWG aluminum and copper cable
• 3. The cutter doesn’t take up a lot of room in the tool bag
• 4. It is perfect for working in confined spaces
• 5. The cutter is made from forged custom, US made tool steel for durability

Additional Product Information

Color Red
Height 1 Inches
Length 1 Inches
Weight 0.5 Pounds

MONVICT Wire Cutters 6 inch Precision Flush Side Cutters with Longer Cutting Edge Ultra Sharp & Powerful Heavy Duty Pliers Ideal for Cables Wires Zip Ties Electrical & Any Clean Cut Needs

MONVICT Wire Cutters, 6 inch Precision Flush Side Cutters with Longer Cutting Edge Ultra Sharp & Powerful Heavy Duty Pliers, Ideal for Cables, Wires, Zip Ties, Electrical & Any Clean Cut Needs

Check Price On Amazon

MONVICT Wire Cutters 6 inch Precision Flush Side Cutters with Longer Cutting Edge Ultra Sharp & Powerful Heavy Duty Pliers Ideal for Cables Wires Zip Ties Electrical & Any Clean Cut Needs

Wire cutters are one of those tools that you might not use every day, but when you need them, you really need them. And when you need a good pair of wire cutters, you need the MONVICT Wire Cutters. These precision wire cutters are just the tool for making clean, precise cuts in wires and cables.

The MONVICT Wire Cutters have a longer cutting edge than most wire cutters, making them ideal for cutting through thicker wires and cables. They’re also made of forged chrome vanadium steel for durability and years of use. Plus, theMONVICT Wire Cutters have a comfortable, non-slip handle that makes them easy to use, even when you’re wearing gloves.

When it comes to cutting wires and cables, the MONVICT Wire Cutters are the perfect tool for the job. Order yours today and be prepared for whatever life throws your way.

Common Questions on MONVICT Wire Cutters 6 inch Precision Flush Side Cutters with Longer Cutting Edge Ultra Sharp & Powerful Heavy Duty Pliers Ideal for Cables Wires Zip Ties Electrical & Any Clean Cut Needs

• How well do the MONVICT Wire Cutters cut?

The MONVICT Wire Cutters are very sharp and can easily cut through cables and wires.

• What is the maximum cutting capacity of the MONVICT Wire Cutters?

The MONVICT Wire Cutters can cut through materials up to 6mm in thickness.

• How comfortable are the MONVICT Wire Cutters to use?

The MONVICT Wire Cutters are designed for comfortable use and feature ergonomic handles.

Why We Like This

• 1. Comfortable scrub material handles
• 2. spring loaded mechanism to minimize hand fatigue
• 3. Can easily snip most wires up to 12 AWG
• 4. Made of chrome vanadium steel for durability
• 5. Full lifetime warranty

Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)

Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)

Check Price On Amazon

Aelfric Eden’s cargo pants are the perfect addition to your wardrobe. With a relaxed fit and multiple pockets, these pants are functional and stylish. Made of cotton and corduroy, they are comfortable and can be dressed up or down. Available in a variety of colors, these pants will become your go-to for every day.

Common Questions on Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)

• What is the price of Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)?
The price of Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S) is $28.99.

• Where can I buy Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)?
You can buy Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S) on the Amazon website.

• What is theMaterial of Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)?
The material of Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S) is 100% Cotton.

• What is the style of Aelfric Eden Color Patchwork Man Cargo Pants Women Street Hip hop Joggers Boys Streetwear Pant with Drawstring (S)?
A

Why We Like This

• 1. Cargo Pants With Drawstring Design
• 2. Multi purpose Cargo Pockets
• 3. Streetwear Pant With Drawstring
• 4. Mens Casual Joggers Pants
• 5. Satisfaction Guarantee

Additional Product Information

Color Muti-color

Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable Aluminum

Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable, Aluminum

Check Price On Amazon

Southwire’s 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable is constructed with soft-drawn copper conductors rated for 90°C dry operation. The green insulated grounding conductor provides a margin of safety for branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings. The binder tape wrapped around the assembly keeps the cable together while the aluminum interlocking armor protects it from damage.

Common Questions on Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable Aluminum

• What is the length of the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable?
The length of the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable is 50 feet.

• What is the gauge of the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable?
The gauge of the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable is 12 gauge.

• How many conductors are on the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable?
There are 2 conductors on the Southwire 68580052 50-Foot 12-Gauge 2-Conductor Type MC Cable.

Why We Like This

• Type MC Cable is constructed with soft drawn copper
• Type THHN/THWN conductors rated 90°C dry available in sizes 14 AWG through 2 AWG
• Green insulated grounding conductor
• Binder tape bearing the print legend is wrapped around the assembly
• Aluminum interlocking armor is applied over the assembly

Additional Product Information

Color Aluminum
Height 11 Inches
Length 3.8 Inches

Buying Guide for Tool To Cut Mc Cable

The first thing you need to do when considering a tool to cut MC cable is figure out what size cable you have. The most common sizes are 1/0, 2/0, and 4/0. Once you know the size of your cable, the next step is deciding on a cutting method. There are three main ways to cut MC cable:

1) Cutting with bolt cutters – This is probably the most common way tocut MC cable. All you need is a good pair of bolt cutters that arethe right size for your cable. Be sure to line up the cutting jawsso they’re evenly spaced on either side of the cable before yousqueeze the handles together.

2) Cutting with a saw – You can use just about any type of sawto cut MC cable, but a hacksaw or reciprocating saw will workbest. Just be sure that whatever type of saw you use has atleast 24 teeth per inch (TPI), otherwise it will take forever toget through the thicker cables.

3) Cutting with an abrasive wheel – If you have access to an anglegrinder or other type of power tool with an abrasive wheel,you can use it to quickly and easily cut through MC cable. Justbe careful not to overheat the cables, as this could cause themto melt and fuse together.

Frequently Asked Question

What is the best tool to cut mc cable?

A pair of metal shears is the best tool to cut MC cable.

How do you properly cut mc cable?

To properly cut MC cable, you will need a sharp pair of scissors or a sharp knife. Cut through the metal sheathing and the insulation around the wires until you reach the metal wires inside. Cut through the metal wires, being careful not to cut the plastic insulation around them.

What are the consequences of not properly cutting mc cable?

If you do not properly cut mc cable, the consequences can be very serious. The most common consequences are electrical shocks, fires, and explosions.

What are some tips on cutting mc cable?

Some tips for cutting mc cable include: -Using a sharp knife or scissors. -Cutting at a 90 degree angle. -Cutting along the length of the cable, not across it.

How do you ensure a clean cut when cutting mc cable?

You can ensure a clean cut when cutting mc cable by using a sharp knife or a pair of scissors.

Conclusion

When you need to quickly and easily get the job done right, the last thing you want is a malfunctioning tool. With the new Tool to Cut MC Cable, you can trust that it will Do its job quickly and efficiently so that you can move on to the next task.

Similar Posts

Leave a Reply

Your email address will not be published.