Best Cam For Your 6.0 Silverado

The Chevrolet Silverado 1500 is a half-ton pickup truck that’s available in rear- or four-wheel-drive configurations. Standard bed lengths are six feet, six inches, and eight feet. Three V8 engines are available: a 5.3-liter gas unit with355 horsepower and 383 pound-feet of torque, a 6.2-liter gas engine with 420 hp and 460 lb-ft, and a 3.0-liter turbo-diesel inline six-cylinder with 277 hp and 460 lb-ft. An eight-speed automatic transmission is standard with the 5.3-liter and 6.2-liter engines, while the diesel gets a 10-speed automatic.

Comparison Chart For Best Cam For 6.0 Silverado

Best Cam For 6.0 Silverado Recommendations

OTUAYAUTO Camshaft Position Sensor – Replacement for Chevy Express Silverado Suburban Tahoe GMC Envoy Yukon Savana Sierra Cadillac Escalade Hummer H2 Pontiac – fits 1999-2007 Vehicles – OEM 12561211

OTUAYAUTO Camshaft Position Sensor - Replacement for Chevy Express Silverado Suburban Tahoe, GMC Envoy Yukon Savana Sierra, Cadillac Escalade Hummer H2 Pontiac - fits 1999-2007 Vehicles - OEM 12561211

Check Price On Amazon

The OTUAYAUTO Camshaft Position Sensor is a great replacement for your Chevy Express Silverado Suburban Tahoe GMC Envoy Yukon Savana Sierra Cadillac Escalade Hummer H2 Pontiac. This sensor is compatible with Chevy 03-07 Express 99-07 Silverado 00-06 Tahoe, GMC 03-04 Envoy 00-06 Yukon 99-07 Sierra, 02-06 Cadillac Escalade. The Camshaft Position Sensor is made with high quality standards in materials and is 100% tested before shipping. This sensor is a direct replacement for the factory part and has Sensor sleeves to help protect wire leads from heat. When the Crankshaft Position Sensor fails, it can cause your vehicle to stall intermittently, the CEL comes on, uneven acceleration, engine misfires or vibrates. You will need this part to fix those issues.

Common Questions on OTUAYAUTO Camshaft Position Sensor – Replacement for Chevy Express Silverado Suburban Tahoe GMC Envoy Yukon Savana Sierra Cadillac Escalade Hummer H2 Pontiac – fits 1999-2007 Vehicles – OEM 12561211

• What is the function of a camshaft position sensor?

The camshaft position sensor is used to synchronize the rotation of the engine cylinders with the rotation of the crankshaft.

• What are the symptoms of a faulty camshaft position sensor?

Symptoms of a faulty camshaft position sensor include engine misfires, stalling, and reduced fuel economy.

• Where is the camshaft position sensor located?

The camshaft position sensor is located on the engine block, near the camshaft.

• How do I know if my camshaft position sensor needs to be replaced?

If your car is experiencing any of the symptoms mentioned above, it’s likely that the camshaft position sensor needs to be replaced.

• What is the best way to test a camshaft position sensor?

The best way to test a camshaft position sensor is with a multimeter.

Why We Like This

• Compatible with Chevy 03 07 Express 99 07 Silverado 00 06 Tahoe, GMC 03 04 Envoy 00 06 Yukon 99 07 Sierra, 02 06 Cadillac Escalade
• Meets Or Exceeds OEM: 12561211, PC273, 8125612110, 5S1253, SU1277
• The Sensor made for highest standards materials, 100% undergo a strict quality tested before shipping
• Direct replacement for the factory part, Sensor sleeves help protect wire leads from heat
• When the Crankshaft Position Sensor fail it can lead to vehicle intermittent stalling, CEL comes on, uneven acceleration, engine misfires or vibrates, then you will need it

Brian Tooley Racing BTR Truck Stage 3 Includes Cam Beehive Springs Pushrods Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

Brian Tooley Racing BTR Truck Stage 3 Includes Cam, Beehive Springs, Pushrods, Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

Check Price On Amazon

THE BRIAN TOOLEY RACING V2 TRUCK CAMSHAFT

The Stage 3 Truck camshaft from Brian Tooley Racing is an excellent choice for the truck enthusiast who wants more power without sacrificing low-end torque. This camshaft is designed to work with 48-53-60-62 Silverado, Sierra, Yukon, Tahoe, Suburban, and Escalade models. It is a great all-around grind that provides an aggressive idle note. An aftermarket converter is highly recommended for optimal performance.

Common Questions on Brian Tooley Racing BTR Truck Stage 3 Includes Cam Beehive Springs Pushrods Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

• What is included in the BTR truck stage 3 kit?

The kit includes a cam, beehive springs, pushrods, and Michigan Motorsports seals.

• What vehicles does this kit fit?

The kit fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2 vehicles.

• What are the benefits of upgrading to this stage?

Some benefits of upgrading to stage 3 include increased power and torque, improved throttle response, and better fuel economy.

Why We Like This

• 218/224 duration
• 553/553 lift
• 110+0 lobe separation angle
• 3 bolt timing gear
• Requires aftermarket converter
• Excellent for 48 53 60 62 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade

DNJ CAM3169 Camshaft for 2001-2007 or Cadillac Chevrolet GMC Hummer Pontiac or Camaro Corvette Escalade Escalade Sierra Silverado Suburban Yukon 5.7L 6.0L or OHV or VIN N VIN S VIN U

DNJ CAM3169 Camshaft for 2001-2007 / Cadillac, Chevrolet, GMC, Hummer, Pontiac/Camaro, Corvette, Escalade, Escalade, Sierra, Silverado, Suburban, Yukon, 5.7L, 6.0L / OHV/VIN N, VIN S, VIN U

Check Price On Amazon

A brand new DNJ camshaft is the perfect replacement for your 2001-2007 Chevrolet, GMC 57L-60L V8 OHV Naturally Aspirated engine. This camshaft also fits Corvette Base / GTO models. DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks. We carefully selected DNJ Engine Components as the sole provider because DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.

Common Questions on DNJ CAM3169 Camshaft for 2001-2007 or Cadillac Chevrolet GMC Hummer Pontiac or Camaro Corvette Escalade Escalade Sierra Silverado Suburban Yukon 5.7L 6.0L or OHV or VIN N VIN S VIN U

• What is the DNJ CAM3169 Camshaft for?

The DNJ CAM3169 Camshaft is for 2001-2007 Cadillac Chevrolet GMC Hummer Pontiac or Camaro Corvette Escalade Escalade Sierra Silverado Suburban Yukon 5.7L 6.0L OHV or VIN N VIN S VIN U.

Why We Like This

• 30+ years of quality, experience, and trust
• Full line provider of Domestic & Japanese engine parts
• Carefully selected by us to be the sole provider
• Engine Components brand has a strong track record
• Helpful in earning customer loyalty

Comp Cams 54-700-11 Stage 1 Thumpr Cam for GEN III LS 4.8 or 5.3 or 6.0L Trucks Camshaft Only

Comp Cams 54-700-11 Stage 1 Thumpr Cam for GEN III LS 4.8/5.3/6.0L Trucks, Camshaft Only

Check Price On Amazon

If you’re looking to add a little more oomph to your LS-powered truck, the Comp Cams 54-700-11 Stage 1 Thumpr Cam could be just what you need. This high-performance cam has been developed and tested on the dyno, and is said to add 68 horsepower to properly matched CK and MK kit components. It’s also designed with high RPM potential in mind, with optimal performance in the 6,700 to 7,300 RPM range. Plus, the “NSR” lobe design means no springs are required, making installation a breeze. And because all the components in a CK or MK kit are carefully matched, there’s no guesswork involved in choosing the rest of your valve train – making it easy to get your truck running at its best.

Common Questions on Comp Cams 54-700-11 Stage 1 Thumpr Cam for GEN III LS 4.8 or 5.3 or 6.0L Trucks Camshaft Only

• What is the duration of this camshaft?
The duration of the camshaft is 204 degrees.

• What is the lobe separation angle of this camshaft?
The lobe separation angle of this camshaft is 112 degrees.

• What is the intake valve lift of this camshaft?
The intake valve lift of this camshaft is 0.477 inches.

• What is the exhaust valve lift of this camshaft?
The exhaust valve lift of this camshaft is 0.459 inches.

• What is the intake centerline of this camshaft?
The intake centerline of this camshaft is 113 degrees.

Why We Like This

Adds 68 Horsepower when used with properly matched CK and MK kit components
High RPM Potential LST camshafts ace in the 6,700 to 7,300 RPM range, allowing engines not only to turn more RPM, but also to make more power in this range.
“NSR” No Springs Required lobe design.
No Guesswork Properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.
Fit type: Vehicle Specific.

Additional Product Information

Height 2.6 Inches
Length 23.31 Inches
Weight 10 Pounds

Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8 or 5.3 or 6.0L Trucks camshaft only

Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8/5.3/6.0L Trucks, camshaft only

Check Price On Amazon

expand

The Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8 or 5.3 or 6.0L Trucks camshaft only is designed to add 89 horsepower when used with properly matched CK and MK kit components. This camshaft is designed for high RPM potential, allowing engines not only to turn more RPM, but also to make more power in this range. With properly matched components in CK and MK kits, there is no guesswork in selecting the rest of the valve train. This camshaft is a vehicle specific fit.

Common Questions on Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8 or 5.3 or 6.0L Trucks camshaft only

• What is the profile of the Comp Cams 54-703-11 Stage 2 Thumpr Cam?

The Comp Cams 54-703-11 Stage 2 Thumpr Cam has a Thumpr Grind camshaft profile. This profile is designed for use in GEN IV LS 4.8 or 5.3 or 6.0L trucks.

• What is the duration of the Comp Cams 54-703-11 Stage 2 Thumpr Cam?

The Comp Cams 54-703-11 Stage 2 Thumpr Cam has a duration of 222 degrees.

• What is the lift of the Comp Cams 54-703-11 Stage 2 Thumpr Cam?

The Comp Cams 54-703-11 Stage 2 Thumpr Cam has a lift of 0.594 inches.

Why We Like This

Developed and Tested on the Dyno
Adds 89 Horsepower when used with properly matched CK and MK kit components
High RPM Potential
LST camshafts accel in the 6,700 to 7,300 RPM range, allowing engines not only to turn more RPM, but also to make more power in this range
No Guesswork Properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.

Additional Product Information

Height 2.6 Inches
Length 23.31 Inches
Weight 10 Pounds

Buying Guide for Best Cam For 6.0 Silverado

When shopping for the best camera for your 6.0 silverado, there are a few things to keep in mind. First, you will want to decide what type of camera you need. There are many different types of cameras on the market, so it is important to know what you need before making a purchase. Second, you will want to consider your budget when shopping for a camera. There are many different price points available, so you will want to find one that fits within your budget. Lastly, you will want to read reviews online before purchasing a camera. This way, you can get an idea of what other customers think about the products that you are considering.

Frequently Asked Question

What are the best cams for 6

.0 chevy silverado There is no definitive answer to this question as it depends on what you are looking for in a camshaft and what other modifications have been made to your 6.0 Chevy Silverado. Some good camshafts to consider for your truck might be the Comp Cams Xtreme Energy Camshafts, Lunati Voodoo Camshafts, or the Crane Cams Hi-6R Camshaft.

What are the differences between the different cams available for 6

.6 duramax? There are four different types of cams available for the 6.6 Duramax engine: 1. OEM Camshaft: This is the stock camshaft that comes with the engine. It is designed for reliability and low noise. 2. High Performance Camshaft: This camshaft is designed for increased power and performance. It may sacrifice some reliability and increase engine noise. 3. Racing Camshaft: This camshaft is designed for maximum power and performance. It will sacrifice reliability and increase engine noise. 4. Custom Camshaft: This camshaft is designed to meet the specific needs of the customer. It can be customized for power, performance, reliability, or noise.

What are the pros and cons of each cam?

There is no definitive answer to this question as it depends on personal preferences. Some people might prefer one type of cam over another for different reasons. Some of the potential pros and cons of different types of cams include: – Dome cams may be more difficult to install than bullet cams, but they can offer a wider field of view.- Bullet cams can be easier to install than dome cams, but they may have a narrower field of view.- Wireless cams may be easier to install than wired cams, but they may require more frequent battery changes.- Wired cams may be more difficult to install than wireless cams, but they will not require as many battery changes.

Which cam is the best for my driving style?

There is no one “best” cam for all driving styles. Different cams will produce different results, so it’s important to choose one that is well-suited to the way you drive. If you’re not sure which cam is best for you, consult with a professional who can help you make the best decision for your needs.

How do I install a cam in my 6

In general, the installation process for a cam in any vehicle will involve removing the old cam and installing the new one in its place. This process will typically require some basic mechanical skills and knowledge of automotive parts and systems.

Conclusion

If you’re looking for a top-of-the-line, dependable camera to help document your off-roading adventures, the Best Cam for 6.0 Silverado is the perfect choice. With its rugged construction and impressive features, it can handle anything you throw at it – and then some. So if you’re ready to start capturing unforgettable memories of your time on the trails, pick up a Best Cam today.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *