The 10 Pin Ribbon Cable Pinout You Need To Know
The first wire is ground, and the second wire is data0. The third wire is data1, and the fourth wire is data2. The fifth wire is clock, and the sixth wire is strobe. The seventh wire is reset, and the eighth wire is power. The ninth wire is ground, and the tenth wire is power.
The function of each wire will depend on the devices that are being used with the cable. For example, if you are using a 10 pin ribbon cable to connect two computers together, then the computer that is sending data will use the data0, data1, and data2 wires to send information to the other computer. The receiving computer will use the clock and strobe wires to synchronize its own data transfer so that it can receive the information correctly.
Comparison Chart For 10 Pin Ribbon Cable Pinout
1
2
3
4
10 Pin Ribbon Cable Pinout Recommendations
Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB
A jumper wire is a thin wire used to connect two points on a circuit board, typically in order to bypass a Solderless breadboard or prototyping board. The term is also used for short pieces of insulated wire used to terminate a cable or connect a test probe to a point on a circuit board.
Jumper wires are available in a variety of colors, lengths, and gauges (thickness). The most common length is 20 cm (8 in), although lengths up to 30 cm (12 in) are available. The most common gauges are 24, 28, and 30 AWG. Jumper wires are also available in differential and matched pair configurations.
Differential jumper wires have two conductors of different colors (typically red and black) and are used to connect two points that are at different voltages. Matched pair jumper wires have two conductors of the same color and are used to connect two points that are at the same voltage.
Jumper wires are typically made from copper or brass and are plated with tin or gold to protect the conductor from oxidation. The insulation is typically PVC or polyethylene.
To use a jumper wire, simply insert the wire into the breadboard hole corresponding to the desired
Common Questions on Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB
• What is the Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB?The Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB is a 120 pin jumper wire that is 10 cm, 20 cm, and 30 cm long. It is made of Dupont cable and has a male and female header. It is used to connect electronic breadboards together.
• What is the purpose of the Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB?
The purpose of the Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB is to connect electronic breadboards together.
Why We Like This
• 1. Sturdy male tinned copper pins never fall off• 2. Female pins are perfectly fit for the Male one• 3. accurate hole pitch: 254 mm• 4. You can flexibly separate them into 1 individual wire perfect for various applications• 5. Comes with 3 x 40pin ( M M, M F, F F ) 20cm multicolored jumper wire
Additional Product Information
| Color | (4) 120pcs Mix kit (40pcs x 3types) |
| Height | 0.74409448743 Inches |
| Length | 9.842519675 Inches |
Sydien 4Pcs DB9 RS232 Serial Female to 10 Pin Female Ribbon Cable Connector Adapter30cm Length
This DB9 RS232 Serial to 10 Pin Female Ribbon Cable Connector Adapter is a great way to connect a serial device to any computer system that has an RS232 serial panel mount receptacle. With a cable length of 12″, this adapter is perfect for connecting barcode scanners, punch card machines, desktop computers, cash registers, printers, POS machines, and LED displays.
Common Questions on Sydien 4Pcs DB9 RS232 Serial Female to 10 Pin Female Ribbon Cable Connector Adapter30cm Length
• What is the name of the company that manufactures Sydien?The company that manufactures Sydien is called Sydien.
• What does RS232 stand for?
RS232 stands for Rating Standard 232.
Why We Like This
• 4Pcs DB9 RS232 Serial Female to 10 Pin Female Ribbon Cable Connector Adapter• 30cm Length• One DB9 female connector and one IDC 10 pin female motherboard connector• Fasten a DB9 (RS232) serial port to any computer system which has an RS232 serial panel mount receptacle• Application:uitable for serial devices such as ISON terminal adapter,barcode scanner,punch card machine, desktop computer, cash register, printer, POS machine, LED display
Additional Product Information
| Color | Grey |
| Weight | 0.13 Pounds |
ZYAMY 10PCS 8P Dupont Line 8P Pins 2.54mm Pitch Female to Female Dupont Cable Connector Multicolor Jumper Wire for Breadboard 20CM
This 8P Dupont connector is a great way to connect various electronic components together. It is female to female, so it is ideal for use with breadboards, and the 2.54mm pin pitch means it will fit most electronic devices. The length of the cable is 20cm, and the multi-colored design makes it easy to identify different cables. This package includes 10 connectors.
Common Questions on ZYAMY 10PCS 8P Dupont Line 8P Pins 2.54mm Pitch Female to Female Dupont Cable Connector Multicolor Jumper Wire for Breadboard 20CM
• What is the use of ZYAMY 10PCS 8P Dupont Line 8P Pins 2.54mm Pitch Female to Female Dupont Cable Connector Multicolor Jumper Wire for Breadboard 20CM?It is used as a connector for breadboards.
• How many pins does the ZYAMY 10PCS 8P Dupont Line 8P Pins 2.54mm Pitch Female to Female Dupont Cable Connector Multicolor Jumper Wire for Breadboard 20CM have?
8 Pins
Why We Like This
• 1. Female to female 8P Dupont jumper wire• 2. Length of 20cm, with 254mm spacing pin headers• 3. Multi colored• 4. Suitable for electronic project and Arduino products• 5. Package: 10pcs 8Pin Female to Female 20cm Dupont Cable
360 Pieces Multicolored Breadboard Jumper Wire Dupont Wire Ribbon Cables Kit 30CM 20CM 10CM 40 Pin Male to Female 40 Pin Male to Male 40 Pin Female to Female for Arduino and Raspberry Pi
These 360 pieces multicolored breadboard jumper wire dupont wire ribbon cables kit are perfect for use in development and prototyping with Arduino, Raspberry Pi, Single Board Computers, Electronics Modules, LoveRPi Kits, and more. They are made of high-quality copper tinned and PVC insulation to provide a simple, quick, and cost-effective solution to mass termination. Additionally, these cables have space and weight saving advantages over other wiring methods. They are ideal for use on computers, peripherals, interface units, audio and digital equipment.
Common Questions on 360 Pieces Multicolored Breadboard Jumper Wire Dupont Wire Ribbon Cables Kit 30CM 20CM 10CM 40 Pin Male to Female 40 Pin Male to Male 40 Pin Female to Female for Arduino and Raspberry Pi
• What is the length of each cable in the kit?The cables are 30 cm, 20 cm, and 10 cm long.
• How many cables are in the kit?
There are 360 cables in the kit.
• What colors are the cables?
The cables are multicolored.
• What are the cables made of?
The cables are made of Dupont wire.
• What is the purpose of the kit?
The kit is designed for use with Arduino and Raspberry Pi electronics projects.
Why We Like This
• 1. 40 pin ribbon cable can be separated into single wire or multi strand combination for various usage scenarios• 2. 10 colour repeat clear carrier colour coded 40 PIN ribbon cable is easy to identify each wire in your DIY or prototype• 3. 254 Pitch Male or female connector at end of each wire supports different connection types• 4. Made of qualified copper tinned & PVC insulation for high quality• 5. Jump Wire Set includes totally 360 wires to support multiple usage scenarios
Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit
If you’re looking for a high-quality, durable, and easy-to-use connector housing and pin set, look no further than the Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Assortment Kit. Made from durable plastic and metal with tin plating and internal pure copper for increased conductivity, this set is perfect for use with Arduino and breadboard-style pin connectors and sockets. The included 10 wire rainbow color flat ribbon IDC wire cable is also compatible with dupont connectors. Plus, the set comes sorted and stored in a transparent plastic box for your convenience.
Common Questions on Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit
• What is the use of Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit?It is an assortment kit that includes connector housings and pins for making electrical connections. The wire cable is compatible with Dupont connectors.
• What is the material of the Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit?
The connector housings are made of ABS plastic, and the pins are made of copper.
• What is the size of the Glarks 700Pcs 2.54mm 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 Plug Connector Housing and Male or Female Pin Connector with 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit?
The connector housings are 2
Why We Like This
• 1. High quality single and double row connector housing pin connector with flat ribbon wire cable assortment kit.• 2. Made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface coating antioxidant, increase the service life.• 3. This set include single row connector 1/2/3/4/5/6/7/8 total 170pcs and double row 2/3/4/5/6/7/8 connector total 70pcs, male / female pin connector total 420pcs, with a 10 wire rainbow color wire cable, sorted stored in a transparent plastic box.• 4. This set of connector is easy to install, you can just put the crimps in the tool and press them, make the crimp the insulation are all the way toward the wire(Tool recommend: B06VWLW11G).• 5. Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards, dupont connector.
Additional Product Information
| Color | Dupont Connector |
| Weight | 0.551155655 Pounds |
Buying Guide for 10 Pin Ribbon Cable Pinout
A 10 pin ribbon cable is a type of cable that is used to connect electronic devices. It is made up of 10 individual wires or pins that are arranged in a row. Each wire or pin has a specific function and is usually color-coded to indicate its purpose.
The most common use for a 10 pin ribbon cable is to connect an external hard drive or other storage device to a computer. However, it can also be used for other purposes such as connecting a printer or other peripheral device.
When choosing a 10 pin ribbon cable, it is important to make sure that the pinout is compatible with the devices you are connecting. Most manufacturers will list the compatible devices on the product page. If you are unsure, you can also check the manual for your devices or contact customer support.
Frequently Asked Question
List all of the different possible pinouts for a 10 pin ribbon cable?
There are numerous possible pinouts for a 10 pin ribbon cable. Some of the more common possibilities include: 1) 2×5 pinout – this is a common pinout for USB cables 2) 3×3+4 pinout – this is a common pinout for SATA cables 3) 4×2+2 pinout – this is a common pinout for IDE cables 4) 5×2 pinout – this is a common pinout for Ethernet cables
What is the most common pinout for a 10 pin ribbon cable?
The most common pinout for a 10 pin ribbon cable is: 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
How do you determine which pinout is being used for a given 10 pin ribbon cable?
If you have a 10 pin ribbon cable and are not sure which pinout is being used, the best way to determine this is to consult the documentation for the device that the cable is being used with.
List all of the different possible uses for a 10 pin ribbon cable?
A few possible uses for a 10 pin ribbon cable are as follows: 1. connecting an internal hard drive to a motherboard2. connecting a CD/DVD drive to a motherboard3. connecting a floppy drive to a motherboard4. connecting an LED panel to a motherboard5. connecting a switch panel to a motherboard
What is the most common use for a 10 pin ribbon cable?
The most common use for a 10 pin ribbon cable is for connecting computer peripherals. This includes devices like hard drives, printers, and scanners.
Conclusion
Our 10-pin ribbon cable pinout is the perfect solution for your data transfer needs. It is reliable, efficient, and easy to use. With our 10-pin ribbon cable pinout, you can easily connect your devices and peripherals to each other. Our 10-pin ribbon cable pinout is also compatible with a variety of devices and interfaces.